What is Torch Down Roofing?

what is torch down roofing

What is torch down roofing? This type of roofing is made up of several different rolls of bitumen. One roll covers about 100 square feet of roof. The weight of the whole system depends on the amount of roll bitumen used. Additionally, there are other materials, such as nails and shingles, that add to the overall weight of the roofing system. Here’s more information on torch down roofing. It is a great choice for many reasons.

To begin, a Bowie roofing contractor will lay down a vapor barrier, which prevents condensation within the new roofing system. Next, a waterproofing membrane will be installed, called an overlay board. This layer is important, since improper installation of the overlay board can cause water to pool inside the roof system. Lastly, Capitol Improvements contractors may attach the base sheet using an adhesive or a heat fusing process.

Despite the many benefits of torch down roofing, this method of roofing has its disadvantages. It is a potentially hazardous process, and roofers should be trained carefully before performing this type of work. For instance, you should always hire a roofing contractor who has plenty of experience with this type of installation. A good roofing contractor will be able to use proper tools to remove the old roofing material safely and efficiently. There are certain tools that are necessary to install this type of roof, so make sure that you have them available before you begin.

Another benefit of torch down roofing is its durability. Because it is resistant to rain and UV rays, it will not melt and would not accumulate large puddles of water. Torch down roofing is a great choice for a roof with a low slope. Since the materials used are asphalt and resin, it will be resistant to punctures, tears, and other damages. When properly installed, torch down roofing can increase the value of a property.

A few pros and cons of this type of roof include being easier to install, adaptable, and safer. Torch down roofing is ideal for roofs with a slightly sloping surface because it reflects sunlight better than its counterparts. Torch down roofing is also great for slightly pitched roofs, especially in mild climates. If you’re wondering what makes this type of roof so appealing, read on to learn more.

When to install a torch down roof, you should make sure that the roof is slightly pitched. The roof must be at least one-quarter of an inch higher than the surrounding area. In addition to the higher costs, torch down roofing requires specialized certification and is a more difficult process than other roofing methods. The cost of torch down roofing will depend on the labor involved and the dangers it poses while installing it. However, you can get a better understanding of the process by contacting a roofer in Takoma Park, MD.

Torch down roofing can be a good choice for flat roofs because it provides a waterproof seal and is inexpensive to apply. Although this type of roofing is not ideal for pitched roofs, it is the best solution for flat roofs. For the reasons above, it is best used on roofs that don’t have any pitch, as it can be easily damaged. It is also difficult to install, especially for roofs that are flat.