If you have made an inquiry about what goes under metal roofing, you may be curious to know how your roof gets protected. Well, to begin with, your roof is first shored to ensure stability and strength and then the nails are hammered in place and the shingles are installed. You can either choose to do this yourself or you can have a roofing company come in and do it for you. You will find that what goes under metal roofing is actually quite simple and if you have any doubts about your ability to complete the job, you should call in a professional.
When you want to know what goes under metal roofing, one of the most important things to understand is that in order for your metal roofing to be strong and sturdy, the nails used must be solid and properly sharpened. There is nothing worse than having nails go off and leaving large and ugly holes in your roof. If you take your time and make sure you use the right nail size, you can almost always get the hole size correct and you won’t end up with a hole larger than the nail head itself.
Another thing that you should take into consideration when you are talking about what goes under metal roofing is the flashing that is put on the roof after the nails have been hammered in. Flashing is put on the underside of the metal roofing so that moisture cannot get inside and dry on the roof as easily. This will also help you to keep out small critters that like to get inside your attic space as quickly as possible. You will often find that the best metal roofing companies will offer you the option of choosing from several different types of flashing materials. You may even be able to have the company install your own flashings if you feel up to the task.
The third area that you will want to take a close look at when you are talking about what goes under metal roofing is the pitch. This is the actual angle that the flashing takes when it is installed. If you don’t have a professional install your pitch, then you could end up with a slope that is too steep and could actually weaken the roof itself over time. Most metal roofing installers will offer you the option of purchasing pre-made pitches, or you can even build your own pitch from scratch if you want. The choice is really up to you, but you will want to make sure that the pitch is built to specific specifications and that it matches the entire profile of your roof.
There are a number of different things that you can do to keep your metal roofing free of debris and mold. If you are careful, you can prevent any water that gets into your attic from getting into the structure of your roof. This can be tricky, especially if you have a flat roof where the water may run off. However, it is possible if you have a sloped roof, and you will want to make sure to take care of this issue as soon as possible. It is also important to remember that metal roofing is one of the most durable types of roofing available, so you may not have to worry about damage caused by rain or wind for years on end.
The last thing that you should keep in mind when you are considering what goes under metal roofing is to consider the fact that it is an extremely flexible material. Depending upon the type of installation you have done, you could end up with some amazing designs that would look amazing as far as a roofing job goes. Just make sure that you choose a company that is professional and that will offer you a design that you can live with for years to come. After all, nothing is worse than having a beautiful roof installed, only to find out that after a few months it looks totally out of place.