# How Much is a Roofing Square Foot?

If you are thinking of how much is a roofing square foot, then you have come to the right place. This article will tell you all you need to know about it. Basically, this refers to the actual square footage of your roof and how much of it is actually made up of tiles. Tiles make up about 50 percent of your roof, so that is why they are called shingles. Most people call them shakes or tiles when they are really just one type of material. The other half is made up of different materials.

When you want to know how much is a roofing square foot, you will first need to measure your roof. To do this, get a piece of tape measures and put a mark on the top left-hand corner. Once you have done this, measure the remaining area of the roof and write down how much is a square foot on a piece of paper. Make sure you write down everything because you will need it for the next step.

Next, go outside and look at a section of your home. Note where the highest part of the roof meets the ground. Use a measuring tape and do the same thing in that area. Write down how much is a roofing square foot for that area and continue measuring until you reach the lowest part of your home. Write down this measurement and continue with the next section.

Now that you have the exact amount of square footage, you can calculate how much is a roofing square foot for every section. Take a look at some examples. For example, a one-inch shingle would be enough for an attic. A six-inch shingle would work well for a gutter. A four-inch shingle would make an efficient attic exhaust fan.

It’s also important to remember that the larger the area, the smaller the square footage. Also, the size of the blades and the number of them must be considered. They are the most important factors. If you have to make a choice between square feet per blade or per gutter, go with the larger one. The less blades you use, the more money you will save.

As you can see, calculating how much is a roofing square foot isn’t as difficult as it seems. All you need is a tape measure and a pencil. This simple process will allow you to know the correct price for a job. Don’t forget to check into the estimated cost of the project when you are comparing prices from different roofers.