How Do You Install Metal Roofing? – Here Are Some Quick Tips
If you are planning to install metal roofing, there are certain things that you must keep in mind. Installing the metal roofing is not an easy task and requires a lot of work. To make things worse, the weather condition as well as the climatic conditions also play a major role in determining the installation process. However, these things can be controlled to some extent. Here are some tips that will help you install the metal roof in an easy way.
The very first thing that you must do before learning how do you install metal roofing is to get a proper inspection done of the roof. Make sure that all the tiles have been counted so that there is no space between them. When you find that the space between the tiles is more than 4 inches, then you need to remove these tiles. This should be followed by the cleaning of these tiles so that there is no space between the tiles.
The next step is to remove the loose tiles from the rafters or the trusses. You may decide to use the hammer and the nails to install the metal sheets on the rafters or the trusses. After removing the old tiles, the next step is to measure the length of the new ones that you will need to use. To do this, you can take the help of an electronic measuring device or a tape measure.
Now, you can prepare the metal sheets that you are going to install. First of all, you will have to remove the loose flakes from the metal sheets. You can do it easily with the help of a vacuum cleaner. You may need to dampen a cloth to clean the metal so that no other material will adhere on it. Once the metal is clean and you are sure that there are no traces of debris, you can start installing the metal sheets on the roof.
The most important thing that you should keep in mind when you want to know how do you install metal roofing is to make sure that the metal sheets are attached properly to the rafters. If you want to know how do you install metal roofing, it is very important to measure the size of your roof so that you can get the exact right size of the tiles. If you want to install it on the attic, you will also have to make sure that the tiles perfectly fit and aligned to each other.
When you install metal roofing, you will be able to create spaces between the tiles. This will allow you to create different roofing solutions like granite shakes, bituminous coating, and attic shingles. If you want to know how do you install metal roofing, you can start this by attaching the first few tiles to the rafters. Once you are done installing the tiles, you can then move onto the other parts of the building.