Some Tips On How To Install Corrugated Roofing Panels
For all those people who are in need of corrugated metal roofing, it is important to know the ways on how to install them. This roofing method has been around for over 40 years and is widely used. Corrugated roofing is made up of long strips that are fitted in a corrugated style and cover the whole length of the roof. The installation process of this roofing system is very straightforward, as it requires little work and can easily be installed by one or two persons.
The process begins with preparing the roof for the installation. The roofing materials such as metal sheets, gravels, tar paper and the like need to be kept dry. This will help you avoid the occurrence of moisture seepage which might cause damage to the corrugated roofing sheets. After this preliminary cleaning, the asphalt shingles should be arranged neatly on the flat roofing materials such as metal sheets. They should be positioned over the gravel and then the tar paper should be slid on top of these.
The next step in the installation process is to measure the entire length of the roof to find out the per square foot value. This value tells you the amount of weight that is required to keep the roof covering taut. It is best to use this calculation when getting the roofing materials, as it is quite accurate. You may also want to calculate the square footage of your home to get the right amount of corrugated roofing sheet that will be needed.
Once this is done, you may start arranging the metal roofing materials in the corrugated roofing pattern. This would include the asphalt shingles, the tar paper, and the per square pieces. Asphalt shingles are arranged in two ways: the folded and the flat. For the folded method, you need to place the first few on the plywood strips to create a pattern for the installation. Then you have to move on to the second layer of asphalt shingles by placing the middle and the last ones on the corrugated roofing sheet.
For the flat roofing installation, you need to start with the metal roofing panel. Take note that this method is easier and faster to complete than the folding method. Just make sure that you are working with an open-end nails that are about an inch long. Now, you may start to hammer the corrugated panels firmly into position.
When it comes to the cutting and nailing part of the job, you have to make sure that the nails are flush with the surface of the corrugated panels. And you also have to keep in mind that the nails should be placed in one long strand. This will help you achieve a sturdier and stronger hold for the roofing panels. For the corrugated roof panels installation, you have to do it with much care so that you can get more years of service out of it.